JINYILED catalogue references to DIP-dimming power supplies and remote controls do not establish direct compatibility simply because both mention dimming. The DIP functions listed for FL and HK are not proof of a compatible external remote interface. The Tiangong remote family requires a matched receiver and checks of strip wiring, dimming method and receiver load. Before ordering, ask the supplier to identify each component’s role, exact model and documented connections, then assess the intended complete combination.
Identify what the switch setting actually changes
The current JINYILED FL catalogue lists four-position DIP dimming, but the settings are incompletely labelled. Do not infer output percentages, minimum brightness or a continuous dimming range. HK also lists DIP dimming, with settings still to be confirmed per model. A switch-setting description is therefore a function to verify, not evidence that every external dimming method is supported.
Separate brightness settings from output-voltage selection. The JINYILED LD catalogue separately lists 12V / 24V output selection, not brightness levels. The selection procedure, permitted load at each voltage and exact model still need confirmation. Do not change output voltage to experiment with brightness or try unknown switches while energised. Qualified personnel should make settings and electrical installations according to the manufacturer’s instructions.
Confirm the remote and receiver separately
The JINYILED Tiangong directory provides display or rotary brightness and colour-temperature control references and requires matching the remote with its receiver. The remote, receiver, power supply and strip have different roles and should be listed separately in the quotation. Successful pairing between a remote and receiver does not establish that the receiver output suits every LED strip.
Split compatibility into two checks: first establish remote-to-receiver pairing, then the receiver’s electrical and dimming compatibility with the selected supply and strip. A shared radio band, similar plug or family name cannot replace specific matching evidence. A colour-temperature button on the remote also does not establish that the proposed strip has the corresponding light configuration.
Ask the supplier to identify the control architecture
Request one project diagram identifying the supply, receiver or controller, strip and point where control commands enter. It should describe the exact proposed configuration for review, not a generic wiring arrangement copied from experience. The diagram should answer these questions.
- Which component actually changes strip brightness: the supply itself or a separate receiver or controller? What are its control input and load output?
- What parameter does the DIP setting select on the exact model, and which component receives the remote command? Does the manufacturer permit both methods together?
- If the proposed system uses both adjustments, how are operating order, limitations and the resulting behaviour defined, and what remains for engineering confirmation?
Read terms such as dimming or PWM in the documentation for the exact model. Distinguish a control input from an output method used to drive the load. Matching terminology is not permission to connect terminals, nor a claim that FL, HK or Tiangong provides a particular external interface. If matching evidence is unavailable, retain the item for confirmation rather than declaring compatibility.
Keep a compatibility record for the proposed combination
- Exact identity: model and revision of the strip, supply, remote and receiver or controller, together with their instructions or drawings.
- Setting purpose: switch labels, meaning of each position, operating conditions and whether the selected model supports external control.
- Electrical match: required strip driving method and voltage, receiver input and output, and per-channel and total load limits.
- Connection definitions: polarity, pin assignments, strip wiring and channel mapping. Wire colour or a plug that fits is not sufficient.
- Remote pairing: the matched remote and receiver, pairing procedure and additional components required. A radio band is not a complete protocol.
- Function scope: components needed for switching, brightness and colour temperature, plus the required low-level, off-state and power-restoration behaviour.
Assess the complete sample control system
Use the intended supply, receiver, remote, strip and connecting parts. Record exact revisions, settings, load and cable configuration. Follow the relevant instructions for operation and installation. The following are acceptance items a buyer can agree, not completed tests or guaranteed performance.
- Adjust brightness only by the confirmed permitted method. Observe steps, flicker, unusual sound or unstable regions, and record the conditions under which they appear.
- Check whether the low brightness needed by the project is stable. Agree the minimum acceptable level from the project sample rather than adopting a promotional percentage.
- Carry out the agreed off and restart operations and record the actual off state. Do not assume a zero-brightness setting provides electrical isolation.
- Check behaviour after power restoration according to the instructions. Establish whether memory, a default level or re-pairing is required; do not assume any is a standard feature.
- If colour-temperature control is needed, use the matching strip and channel configuration to check operation, available range and brightness behaviour. Recheck affected items after component revisions change.
A sample that lights up has not necessarily met the required dimming range, switching and recovery behaviour. Keep settings, component lists and exception records with the accepted configuration for order review. One observation does not establish flicker-free operation or full-range compatibility for every model.
Submit a configuration that can be checked item by item
- Required operation: on-unit brightness settings only, or remote switching, brightness or colour-temperature adjustment.
- Existing or proposed strip model, driving method, voltage and wiring, plus actual sample load and installation purpose.
- Exact FL, HK or other supply model and switch-setting documentation. For Tiangong, identify the remote and receiver models separately.
- Supplier-confirmed control architecture, interface documents, permitted setting combinations and unresolved items.
- Sample acceptance items, required off and power-restoration states, and the test conditions and revision records to retain.
- Itemised supply scope: who supplies the power unit, remote, receiver, connectors, cables and LED strip, and which need separate purchase or assembly.
Use JINYILED’s LED Power Supplies and Power & Control Accessories directories as starting points, then request confirmation for the proposed combination. Catalogue display does not establish universal fit or included accessories. If empty silicone tubes or diffuser covers are purchased separately, list them as separate components too; empty tubes and covers do not include LED strips.
Common buying questions
Does DIP dimming mean any remote will work
No. The DIP function alone does not establish a compatible external control input. Check the exact supply, receiver and remote architecture, then confirm the complete match with the strip.
Do FL’s four positions establish fixed brightness percentages
The current catalogue confirms four-position DIP dimming but does not fully label the settings. Confirm each position’s meaning, output ratio and model-specific operating conditions rather than supplying assumed percentages.
Are matching voltage and plugs enough
No. Check driving method, input and output, channels, load, pin assignments and dimming method. Remote-to-receiver pairing also needs separate confirmation.
Does one dimmable sample prove every order configuration is compatible
No. Keep exact models, revisions, settings, load and cable conditions with the sample result, and cover the agreed operating range. When components or configuration change, recheck the compatibility and acceptance items affected.